Electrostatic Discharge Simulator (ESS series) ESD SimulatorESS-B3011A & GT-30RA
Cost-oriented Basic model
Cost-oriented basic model ESD Simulator equipped with the light weight discharge gun.
The output voltage can be selected up to max. 30 kV and compliant to both EN / IEC 61000-4-2 Standard and ISO 10605 Standard.
Features
● “Pre-checking function” tfor performing a more reliable testing
● “CR constant checking function” (no indicator) to prevent incorrect unit attachment”
● “Discharge Detecting Function” to realize the air-discharge confirmation.
● “Lightest Discharge Gun in the market” to lighten the continuous operation.
● “White LED Irradiator” to facilitate the visualization of the discharging area.
● One-touch exchange of gun head and CR unit realized
* ISO 10605 compliant test performable with addition of the gun head and CR units (only with ESS-B3011A)■Discharge output waveform (IEC Standard)
Specifications
Parameter Specification Model ESS-B3011A Output voltage 0.20 kV ~ 30.0 kV ± 5% (30.5 kV max)
*0.20kV ~ 1.99kV ±10% 2.00kV ~ 30.0kV ±5%
~ 10.0kV : 0.01kV step 10.0 ~ 30.0kV : 0.1kV stepPolarity Positive / Negative Repetition cycle 0.05s ~ 9.99s ± 10%, 0.01s step / Manual Discharge No. of times 1 ~ 999 times, Preset 1 time step or continuous preset Discharge mode Contact discharge / Air discharge Trigger mode Gun trigger / Main trigger Operation panel Indicator : 5 x 7 Dot matrix LED / Operation : Push buttons (Partially lighting) Radiation mode select switch Extra / Normal switching function built-in Discharge detection Discharge detection function in air-discharge equipped. Pre-checking function High voltage output checking function
(by user operation. Not the calibration but just checking)CR & Gun head
checkingCR constant and gun head recognizable
(to prevent the wrong combination without indicator)IEC LEVEL Contact discharge mode : 2.0 kV, 4.0 kV, 6.0 kV and 8.0 kV step Switching function Air discharge mode : 2.0 kV, 4.0 kV, 8.0 kV and 15.0 kV step Warning lamp Lighting at voltage output from the generator.
Blinking at electro-static dischargingCharge capacitor / resistor 150 pF ±10%, 330 Ω ± 10% (Built-in CR unit for discharge gun GT-30RA) Charge resistor in generator 10 MΩ (Totally 53 Ω in combination with 43 MΩ in discharge gun)* Power supply / consumption AC 100 V ~ AC 240 V ± 10% 50 Hz / 60 Hz 62 VA Dimensions Generator : (W)270 mm x (H)263 mm x (D)200 mm
Discharge gun : (W)83.3 mm x (H)217.2 mm x (D)229.3 mmWeight Generator : Approx. 4.6 kg
Discharge gun : Approx. 800 g (excluding cable and connector)* Remote control function not built-in.
* The constant depends on combination with CR unit for the discharge gun.
back to list
Repair, Inspection and Calibration
Customer Service CenterNew Purchase Consultation, Materials Request
Product Inquiry Form
Options
- Infrared Remote Controller MODEL : 13-00004A
- USB Optical Module Kit MODEL : 07-00022A
- AUX Connector Junction BoxMODEL : 05-00052A
- Warning Lamp MODEL : 11-00014B
- Gun Holder MODEL : 03-00075A
- Electrostatic Discharge Fixture
- CR Unit (Dummy)
- CR Units Storage Case
- Options for ISO 10605 Standard compliant test
- Extension cable for GT-30R MODEL : 05-00047B
- Magnetic Field AdaptorMODEL : 03-00070A
- Impulsive Electric Field Adaptor MODEL : 03-00068A
- Impulsive Magnetic Field Adaptor MODEL : 03-00069A
- Fast Rise Time AdaptorMODEL : 03-00073A
- Discharge Tip (Small Diameter)
- Discharge TipsMODELS : 12-00007A / 8A / 9A
- Micro-gap Discharge Tip MODEL : 12-00010A
- Specialized Case for Discharge Gun MODEL : 09-00006A
- Gun HeadMODEL : 03-00071A / 03-00072A
- CR Units
- Horizontal Coupling Plane (HCP) MODEL : 03-00020A
- Test Table MODEL : 03-00039A
- Ground Reference Plane (GRP) MODEL : 03-00007A
- Insulating support MODEL : 03-00024A
- Cubic Insulating Block100 MODEL : 03-00029A
- Noise Canceller Transformers NCT series
- Automated ESD Eliminator MODEL : 01-00013B
- Free Arm Gun Stand MODEL : 03-00022B
- Probe Stand MODEL:03-00108A
- Insulating sheet MODEL : 03-00004A
- Floor-standing vertical coupling plane MODEL:03-00034A
- Vertical coupling plane MODEL : 03-00005A
- Test environment (Floor-standing type) ESS-801GL
- Test environment (Table-top type) ESS-801
- Discharge resistance cable MODEL : 05-00054B
- Insulating Support MODEL : 03-00066A
- Insulating Block MODEL : 03-00054A
- Aluminum Plate for Test MODEL : 03-00053A
- Ground Cable (for ISO Standard) MODEL : 05-00104A
- Coupling Plane for ISO 10605 Annex F MODEL : 03-00065A
- Conductive Mat (for ISO Standard) MODEL : 03-00055A
- Conversion Adaptor for Free Arm Gun Stand MODEL : 03-00074A
- ESD Elimination Brush MODEL : 05-00125A
- Current Target Mounting Board MODEL : 03-00052B
- Current Target Mounting Board MODEL : 03-00027A
- ESD Current Target MODEL : 06-00094A
- Faraday cage MODEL : FC-200
- Attenuator MODEL : 00-00022A
- Coaxial Cable MODEL : 02-00157A
- ESD Current Target Calibration Set MODEL : 06-00068A
- Discharge Gun Mount MODEL : 03-00061B
- GND Cable Positioner MODEL : 03-00060A
- Electrostatic Discharge Simulator ESS-B3011A
- Discharge Gun for Electrostatic Testing GT-30RA/GT-30R3302KA
Related Products
- Discharging Gun for AEC-Q200 standard read more
News
- 04/25/2024 InformationLong holiday information
- 12/26/2023 InformationInformation on year-end and New Year holidays
view all
Repair, Inspection and Calibration
Customer Service CenterNew Purchase Consultation, Materials Request
Product Inquiry Form
- ESD Simulator_ESS-S3011A_B3011A
- Impulse Noise Simulator INS-S220/S420 IJ-AT450
- VDS-2002
Open Catalogs and Technical Materials List
To provide you with a better experience, we use cookies on this website. By continuing to browse, you consent to the use of cookies.OK